Robot Operating Procedures


Published:

2023-03-28

(1) Robot power transmission procedure: first close the air switch, then turn on the power of the robot transformer. Turn on the button, then turn on the welding power switch, and finally unscrew the power of the robot control cabinet. (2) Robot power-off procedure: first turn off the power of the robot control cabinet, then turn off the welding power switch, then cut off the power of the robot transformer, and finally pull down the air switch. (3) After the robot control cabinet is powered on, it takes a certain amount of time for the system to start (data transmission), and the operation should be performed after the display screen of the teach pendant enters the operation interface. (4) Before operating the robot, all personnel should retreat to a safe area (beyond the security line).

(1) Robot power transmission procedure: first close the air switch, then turn on the power of the robot transformer. Turn on the button, then turn on the welding power switch, and finally unscrew the power of the robot control cabinet.
(2) Robot power-off procedure: first turn off the power of the robot control cabinet, then turn off the welding power switch, then cut off the power of the robot transformer, and finally pull down the air switch.
(3) After the robot control cabinet is powered on, it takes a certain amount of time for the system to start (data transmission), and the operation should be performed after the display screen of the teach pendant enters the operation interface.
(4) Before operating the robot, all personnel should retreat to a safe area (beyond the security line).